Aerial Video System

15 Km Aerial Video System 1.2 / 2.4GHz 1000mW

15 Km Aerial Video System

1.2 / 2.4GHz 1000mW

 

The Aerial Video System is a complete wireless video kit, comprising of only top notch components which have been assembled into a plug and play system. A very powerful transmitter is included with this kit. This setup has been flown up to 15Km away, in a UAV airplane.

• All inclusive plug and play wireless video system • 1.2 / 2.4GHz 1000mW Video Transmitter• 1.2 / 2.4GHz Standard Receiver• Camera ( KX-131 / KPC-650 )• >15Km range

1.2 / 2.4GHz 1000mW Audio/Video Transmitter

Channel Frequencies:

CH1   1080   2410   MHz CH2   1120   2430   MHzCH3   1160   2450   MHzCH4   1200   2470   MHzCH5   1010   2370   MHzCH6   1040   2390   MHzCH7   1240   2490   MHz CH8   1280   2510   MHz

 

 

• 1000mW RF output power • 8 channel operation PLL• Detachable - swivel SMA antenna

Purchase includes : • TX-1200/2400-1000• Transmitter antenna • RCA adapter cable

It is very easy to implement this transmitter into your design.

The transmitter has four connections:Red:     Power Black:   GND Yellow: Video in White:  Audio in

You can connect any composite video source to this transmitter. This includes but not limited to:Digital camera video outVideo camera video outMicro camera video out

The transmitter includes an RCA adapter cable. This cable terminates with female RCA connections.Adapters are needed to connect this transmitter to some of our micro cameras: KX-131- Male BNC to male RCA KPC-650CH- Male BNC to male RCA  

The transmitter heats up relative to the operating voltage. It is normal for the transmitter to heat up 60 degrees Celsius when being powered from a 12VDC source. For prolonged life it is recommended to use a heat sink or place the transmitter in an airflow.

 

The easiest way to power the transmitter is by an AC to DC wall convertor. The best portable power source is a 3s1p Li-Poly battery. To determine the run time of a battery:battery capacity in mAh divided by total current draw in mA= run time in hours

Current draw is added together (example) :Transmitter- 300mA Camera- 150mAMicrophone- 50mATotal= 500mA

A 1000mAh 3s1p Li-poly will ideally power the above for two hours. It is always vital to consider how you battery voltage will drop as the battery is being discharged. A 15% margin is enough. The 1000mAh battery will power the above setup for 51 minutes.

1.2 / 2.4GHz Standard Receiver

Features: • 2.4GHz audio/video receiver • Stable 8 channel operation ( PLL) • Compatible with our 500 and 1000 mW 2.4GHz transmitters • Detachable - swivel SMA antenna• Anodized aluminum finish• A/B bogus switch for your switching pleasure - it does not do anything

 

 

 Purchase includes : • Channel selection tool• 3dBi omnidirectional receiver antenna • A/V OUT RCA adapter cable • 6" power plug

KX-131 Camera

Description:We now offer our KX-131 in a cased style. The camera retains all the features that have made the KX131 uncased model so popular, and has added a few new features that makes it a very versatile camera. One of the primary benefits in this new camera is it's very flexible voltage requirements. The KX-131 is natively a 5v camera, but includes a compact 12v switch mode regulator in the cable. This allows this camera to be used with both our 12v and 5v transmitters.The camera's casing is made of aluminum. This proves to be a very tough camera suited for even the most demanding conditions.

Features: • 1/4" Sony Super HAD CCD • 380 horizontal lines of resolution.• Sensitivity: 1.0Lux / F2.0• 1.0 ounce (30 grams• DC 5V (±10%) operating voltage. 12V with regulator.• 180mA power consumption • 30mm(lense to back) x 30mm(W) x 25(H)mm

 Purchase includes :• KX131 camera and 70 degree FOV lense• Video out cable with embedded voltage regulator • Aluminum swivel mount

KPC-650 camera

Description:The KPC650 is high resulution low light camera suited for aerial video. We inlcude a 70 degree FOV lens. The camera includes a 1/4x20 mounting stud that can be easily moved to the top or bottom of the body to suit a wide variety of installations.The camera's casing is made of aluminum. This proves to be a very tough camera suited for even the most demanding conditions.

 

Features: • SONY 1/3" Super HAD CCD w/ HQ1 Shipset • Effective pixels NTSC:768(H) x 494(V)• 550 TV Lines (High Res.)• Sensitivity: 0.05 Lux• C/CS mount lenses• 4.8 ounces (137 grams)• DC 12V (±10%) operating voltage. .• 180mA power consumption • Video output: Composite 1[Vr-r] 75 unbalanced• Scanning system 2:1 Interlace• S/N ratio: more than 45dB (AGC Off)• 31mm(W) X 31mm(H) X 55mm(L)

Purchase includes :• KPC650 camera and 70 degree FOV lense• 70 degree FOV lens

 

Aerial Video System