Autopilot Signal Splitter

A CSS22 is designed to make easier a STA3x installation, setup and use. The main CSS22 function is a servo control signal switch

 

CSS22 Signal Splitter

 

A CSS22 is designed to make easier a STA3x installation, setup and use. The main CSS22 function is a servo control signal switching between the STA3X PWM output signals and the external control PWM signals. A common aircraft modeling RC receiver can be used as the external control signal source. The CSS22 has the STA3X interface signal pin connectors. The CSS22 supports the optimized STA3X power supply.

Input PWM signal frequency 50 ± 20% Hz

Allowable control signal on-off time ratio 0…100 %Switch PWM signal duration (STA3x controls the servos) 1.5…1.7 msExternal control PWM signal high level 1.7…5.75 VExternal control PWM signal low level -0.8…0.5 VServo and output buffer power supply 4.5…6 VOutput servo PWM signal high level 3.84…5.9 VOutput servo PWM signal low level 0…0.33 VOutput current per servo pin 20 mASTA3x and the external device supply voltage 5,6 ± 3% VOutput current 600 mASupply voltage 7…16 VWeight (including 300 mm of cable and connector) less then 55 gOverall dimensions (without cable) Length, Width, Height 57x50x15 mm

 

Autopilot Signal Splitter